Brake line 2004 Blazer
Brake line 2004 Blazer
Newbie here...
Brake line from ABS module to first union rusted to failure .
Is there a replacement option that has the flarings and fittings included available ? (hope that makes some sense)
Thanks for any advice anyone has .
Brake line from ABS module to first union rusted to failure .
Is there a replacement option that has the flarings and fittings included available ? (hope that makes some sense)
Thanks for any advice anyone has .
Re: Brake line 2004 Blazer
you can check with the dealer to see if they have the replacement lines available. If the line rusted out, were the fittings okay? you can buy brake line from the parts store and make a new line with the fittings. You will need a flare tool for the ends and maybe a line bender to get the angles or just take it to a auto repair shop and have them make you one.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: Brake line 2004 Blazer
Thanks carriedi for your quick response.
Fitting was rusted at union down line, ok at ABS module.
I'm not so flexible any more and getting the line out was a challenge, was hoping for a quick install with a less winding route .
Looking at flaring tools now.
Fitting was rusted at union down line, ok at ABS module.
I'm not so flexible any more and getting the line out was a challenge, was hoping for a quick install with a less winding route .
Looking at flaring tools now.
Re: Brake line 2004 Blazer
there are different styles of flares used. make sure you use the correct one for your vehicle. Most parts stores have the fittings and brake line you need.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: Brake line 2004 Blazer
Have the brake line and fittings now, the original line has 2 spirals , are the spirals mandatory ? , be a lot easier going straight...
Thanks !
Thanks !
Re: Brake line 2004 Blazer
no, you don't have to exactly match the original line. Just do the best that you can and make sure there isn't any leak from the line of fittings
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: Brake line 2004 Blazer
Thanks again carriedi .
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 16382 Views
-
Last post by carriedi
Sun Apr 17, 2016 1:44 pm
-
- 1 Replies
- 12928 Views
-
Last post by carriedi
Thu Dec 08, 2016 10:19 pm
-
-
New post code P0106 Blazer ENGINE RUNNING HEAVY
by DARKHARRIS » Tue Jan 05, 2016 1:29 pm » in Chevy Blazer - 1 Replies
- 7245 Views
-
Last post by tech3
Tue Jan 05, 2016 5:10 pm
-
-
-
New post 2001 Chevy 4.3 Blazer Trany stays in 2nd & speedo @ zero
by roy33 » Fri Jan 06, 2017 12:10 pm » in Chevy Blazer - 1 Replies
- 9792 Views
-
Last post by carriedi
Sat Jan 07, 2017 1:11 pm
-