2002 chevy blazer, sensor problems
2002 chevy blazer, sensor problems
The engine light came on, code said it was oxygen sensor. Replace sensor, light came back on, code came up saying it was same sensor. Replace it again, drove 8 miles , light came back on. Code says it is same sensor!Help, whats going on?
Re: 2002 chevy blazer, sensor problems
Well, first of all, can you post the code you're getting? You should make sure you're replacing the correct sensor, as sometimes it can be confusing as to which is bank 1 or bank 2, or sensor 1 or 2.
If you're sure you've replaced the correct sensor, then it must not be a sensor problem. You could have a wiring issue going to that particular oxygen sensor, or a computer problem.
If you're sure you've replaced the correct sensor, then it must not be a sensor problem. You could have a wiring issue going to that particular oxygen sensor, or a computer problem.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Re: 2002 chevy blazer, sensor problems
If its the wiring, what part do I have to buy to fix it? Thanks for any help you can give me.
Re: 2002 chevy blazer, sensor problems
If it is a wiring problem, you have to repair the wiring. You don't buy a part to fix that. I'd still like to know what trouble code you had for which oxygen sensor, just so we can make sure you replaced the correct one.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Re: 2002 chevy blazer, sensor problems
The code said bank 1, I can't get my car inspected, the light keeps coming back on. How can I find out if it is the wiring?
Re: 2002 chevy blazer, sensor problems
Can you please post the actual code number please? Not just what it says, but the actual code itself. If it's bank 1, that would be the driver's side of the engine...is that the one you replaced?
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Re: 2002 chevy blazer, sensor problems
yes, it was on the drivers side
Re: 2002 chevy blazer, sensor problems
Ok, so I'll assume you replaced the correct sensor although there are two bank 1 sensors, one before the catalytic converter and one after it. Like I said before, if it's not a sensor issue, then you have a wiring problem going to the sensor or a bad ECM. Not much really else involved in those circuits, it's pretty straight forward. Trace the wiring from the sensor to the computer and see if there are any problems like a short, a rubbed through wire, corrosion, etc. If not, replace the computer and have it programmed.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Re: 2002 chevy blazer, sensor problems
I'll checked the wiring going to the sensor, thanks for all your help.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New post 2001 Chevy 4.3 Blazer Trany stays in 2nd & speedo @ zero
by roy33 » Fri Jan 06, 2017 12:10 pm » in Chevy Blazer - 1 Replies
- 9558 Views
-
Last post by carriedi
Sat Jan 07, 2017 1:11 pm
-
-
-
New post 2008 Chevy trailblazer crank sensor problem
by Ronnie » Thu Jun 25, 2015 2:02 pm » in Chevy Trailblazer - 2 Replies
- 16546 Views
-
Last post by Ronnie
Fri Jun 26, 2015 7:02 am
-
-
- 3 Replies
- 15938 Views
-
Last post by carriedi
Sun Apr 17, 2016 1:44 pm
-
- 1 Replies
- 12626 Views
-
Last post by carriedi
Thu Dec 08, 2016 10:19 pm