heaters not working
heaters not working
my 98 town & country wont push hot water thru the heater core, Iv'e plugged the return side, and run the engine till I got hot water out the return hose. then I hooked it back together, and got heat. I let the car cool down and restarted the engine, let it get up to running temp and no heat from the heater, both hoses were cold going into the core and out. Has anyone got anyone got any ideas? oh and nomatter what I do I cant get any heat out of the rear heater. please help!!
Re: heaters not working
you might want to check the performance of your water pump. the impeller may not be doing it's job.
when you took off the hose for the heater and ran the engine, how much coolant was coming out? Should have been a lot.
when you took off the hose for the heater and ran the engine, how much coolant was coming out? Should have been a lot.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: heaters not working
Probably you reconnected the tubes in the heater? and if you put on the heater is there air coming out or nothing at all?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New post 2007 Sebring brake lights not working. High mount works, low
by towtruckguy » Tue May 13, 2014 3:43 pm » in Dodge And Chrysler - 1 Replies
- 4529 Views
-
Last post by carriedi
Wed May 14, 2014 10:25 am
-