ABS light on no code shows
ABS light on no code shows
Toyota Sienna brakes seem to act like they have warped rotors but had new rotors installed ABS light used to come on after braking going down road replaced left front sensor but still have that warped brake feel acts like the abs is running like in the winter whan u brake fast I have no idea whats wrong. No ABS light now
Re: ABS light on no code shows
what year is your sienna?
if you have the light come on but not stay on then it's an intermittent problem and sets a soft code.
what you should have done is hook up a scanner and watch the data stream when you can recreate the symptom. this way you can see what may be activating the light. Or scan the ABS when the light is on. Cycling the key will reset the ABS and if it doesn't see the condition it will turn off the light until it happens again.
if you have the light come on but not stay on then it's an intermittent problem and sets a soft code.
what you should have done is hook up a scanner and watch the data stream when you can recreate the symptom. this way you can see what may be activating the light. Or scan the ABS when the light is on. Cycling the key will reset the ABS and if it doesn't see the condition it will turn off the light until it happens again.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: ABS light on no code shows
carriedi wrote:what year is your sienna?
if you have the light come on but not stay on then it's an intermittent problem and sets a soft code.
what you should have done is hook up a scanner and watch the data stream when you can recreate the symptom. this way you can see what may be activating the light. Or scan the ABS when the light is on. Cycling the key will reset the ABS and if it doesn't see the condition it will turn off the light until it happens again.
Re: ABS light on no code shows
Have you check the system? The first thing I would look at is a fault in the ABS system.
-
- Similar Topics
- Replies
- Views
- Last post