2005 envoy and p0301 code
-
- Posts: 1
- Joined: Mon Sep 22, 2014 11:58 am
2005 envoy and p0301 code
2005 envoy with 127k miles. Changed the plugs and put in a new coil in cylinder1. Still have the issue, next I took out the throttle body and cleaned that and while I was at it switched coil 1 and 2 even though I put a new coil in 1just to see if the new coil was the problem. Still have the same issue code P0301. Any thoughts as to what to try next? Thanks for any help.
Re: 2005 envoy and p0301 code
if you change the plug and coil for number one and still have the misfire for #1 you should look at the injector. If you switch #1 injector with the next one closest in the fuel rail, then check to see if the miss follows the injector or stays in #1. If it switches then you have a bad injector. If it stay on #1 then I would look for a mechanical problem with #1
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New post 2005 Envoy 4.2 in line 6 cyl, rough idleing,
by bobmcelyea » Sun Sep 28, 2014 3:26 pm » in GMC Trucks - 4 Replies
- 5734 Views
-
Last post by carriedi
Fri Apr 24, 2015 10:28 am
-
-
- 1 Replies
- 11434 Views
-
Last post by carriedi
Tue Jan 26, 2016 11:31 am
-
- 1 Replies
- 17433 Views
-
Last post by carriedi
Sat Mar 24, 2018 3:00 am
-
- 1 Replies
- 17344 Views
-
Last post by carriedi
Fri Apr 06, 2018 9:34 am
-
- 1 Replies
- 14998 Views
-
Last post by carriedi
Sun Dec 01, 2019 5:09 pm