Bad Driver's Door Module???

wingrider54
Posts: 1
Joined: Sun Feb 09, 2014 1:36 pm

Bad Driver's Door Module???

Unread post by wingrider54 » Sun Feb 09, 2014 1:50 pm

For the past few weeks, when the temperatures have been in the single digits, my key fob would not actuate the door lock on the driver's door. Once temps warmed up a bit,
it worked. This past Friday as I was driving to work, nothing at the module worked; locks, windows, mirror, etc., and hasn't since.

I pulled the module and attempted to test for power. I am getting battery voltage at the 4-wire connector toward the front of the module, at the orange wire (#2) and have
continuity between ground and the black wire (#4).

Because of the size of the wires, I have to assume this is the connector I should be checking, prior to replacing the module. Am I correct?

Any help is deeply appreciated.
Attachments
DDM-Connectors_8.jpg
Chevy Silverado drivers door module.
DDM-Connectors_8.jpg (3.31 KiB) Viewed 8190 times

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: Bad Driver's Door Module???

Unread post by carriedi » Sun Feb 09, 2014 10:15 pm

yes, that does appear to be the module for 03-07 silverado. and the larger wires are the power and grounds. red/white-power, black-ground, blue and brown are for the L/F window motor
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

northwoodgarage123

Re: Bad Driver's Door Module???

Unread post by northwoodgarage123 » Thu Feb 13, 2014 12:36 am

Decription of wires given by 'carriedi' are right try this. Thanks for this information.

REVERBANDBEER
Posts: 1
Joined: Fri Jul 04, 2014 8:00 pm

Re: Bad Driver's Door Module???

Unread post by REVERBANDBEER » Fri Jul 04, 2014 8:02 pm

Check the MBEC 50amp fuse in the fuse box under the hood.

  • Similar Topics
    Replies
    Views
    Last post