Rough Idle and Knocking
-
- Posts: 1
- Joined: Sun Mar 03, 2013 9:04 am
Noise in the front end of my Buick
2003, buick regal ls , i replace the hub bearing now its making clicking noise from the front.
Re: Noise in the front end of my Buick
Well, you either messed something up during your repair or you have a different problem all together. You might want to recheck your work and make sure nothing came loose or broken after your repair.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Rough Idle and Knocking
I have a 2003 Buick Century 3.1 L engine with 49K miles, has been running great until the other day, went to the store came home everything was fine, but when it was put into park it rev'ed slightly then started Idling very rough, and knocking..
I have replaced the EGR Valve, The Plenum Gasket, Plugs, wires, and all 3 Ign. coils.
I've checked vacuum hoses, fuses, and various connections.
I got rid of the EGR code but still have the P0300 code of Engine Misfire, any ideas what to check? keep in mind everything has been FINE up too when it was put into park the other day, and yes it has not moved since, still idling rough and knocking.....HELP!!! Rick Maxwell Goodyear, AZ.
Also there has been NO Overheating Issues, and Oil is Changed every 3K
I have replaced the EGR Valve, The Plenum Gasket, Plugs, wires, and all 3 Ign. coils.
I've checked vacuum hoses, fuses, and various connections.
I got rid of the EGR code but still have the P0300 code of Engine Misfire, any ideas what to check? keep in mind everything has been FINE up too when it was put into park the other day, and yes it has not moved since, still idling rough and knocking.....HELP!!! Rick Maxwell Goodyear, AZ.
Also there has been NO Overheating Issues, and Oil is Changed every 3K
Re: Rough Idle and Knocking
you should have it scanned for misfire counter and see what cylinders are affected. Once you can see how many and which cylinders are misfiring you can determine what direction you should go
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: Rough Idle and Knocking
The knocking sound very well could be a flywheel/flex plate but it should rap at idle. Mine was rapping and thought is was the bottom end of the motor. Sounded very similar. Whats stumping me is it don't do it at idle. I'm guessing the torque converter or transmission. The check engine light never came on?
-
- Similar Topics
- Replies
- Views
- Last post