Fan stopped blowing and climate control display went black
Re: Fan stopped blowing and climate control display went bla
Wanted to post an update. Went to my normal mechanic this morning & he found the problem right away. When the issues started right after having someone put in a high beam bulb, it was because when he put the headlight back in, he some how pushed a bundle of wires into the pulley system & it chewed a bunch of wires apart. Thank goodness it was a $64 repair & not a couple hundred. Thank you for helping!
Re: Fan stopped blowing and climate control display went bla
congrats! glad you found it and it wasn't something expensive
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: Fan stopped blowing and climate control display went black
Where is the bundle of wires exactly?
Re: Fan stopped blowing and climate control display went black
the fuses you want to check for the heater are : IP MDL fuse 10amp and IGN HVAC fuse 10amp in the center console fuse box. They are the two fuses that power up the hvac control module. The IP MDL fuse should be power all the time. the IGN HVAC fuse should be power with the key on.
wipers: check to see if you have power with the key on, on fuse 29. The wiper fuse is #29 and should be a 25 amp fuse.
wipers: check to see if you have power with the key on, on fuse 29. The wiper fuse is #29 and should be a 25 amp fuse.
-
- Similar Topics
- Replies
- Views
- Last post